Our work

How to model 10MW+ turbines aerodynamically?

The EU FP7 project AVATAR (AdVanced Aerodynamic Tools of Large Rotors) ran between 1 November 2013 and 31 December 2017.
Prompted by the underlying motivation that scaling up wind turbines to 10-20 MW is expected to reduce the costs of off-shore wind energy, the aim of the AVATAR project was to deliver aerodynamic and aero-elastic models and tools for a more validated and higher fidelity design modelling of 10MW+ scale wind turbines.

However, although 10MW+ turbines are seen as a way to reduce the overall ‘Cost of Energy’ for off-shore wind power, the design of the required very large rotor blades fell outside the validated range of current state-of-the-art aerodynamic and aero-elastic tools in various aspects. Firstly, very large blades operating at high tip speeds mean high Reynolds and Mach numbers for which the effects are neither certain nor adequately validated. Secondly, thick(er) airfoils need to be assessed in terms of aerodynamic performance while increased flexibility will lead to larger deflections and more pronounced non-linear aero-elastic behaviour with unknown aerodynamic implications, etc. All this is further complicated by the desired implementation of active and/or passive flow devices.

Wind tunnel flow visualisation of airfoil with and without vortex generators

As a result, a wide variety of aerodynamic models was considered, ranging from low-complexity/computationally efficient models (i.e. Blade Element Momentum - BEM) to high-fidelity/computationally demanding models (e.g. Computational Fluid Dynamics - CFD), including intermediate models (e.g. free vortex wake models-FVW). This enabled an improvement of the fast, low-complexity tools by calibrating in terms of results from high-fidelity models. The model assessment was carried out on two 10 MW reference wind turbines (RWT’s), one originating from the INNWIND.EU project, and another one designed in AVATAR.

DU 00-W-212 airfoil model used in pressurized wind tunnel test

The improvement and validation of models was also based on suitable experimental data, mainly wind tunnel measurements and a selected number of field measurements such as wind tunnel measurements on a DU 00-W-212 airfoil up to a Reynolds number of 15 million in a pressurised tunnel. Wind tunnel measurements on flow devices (e.g. vortex generators and flaps) were also performed.

Model improvements

AVATAR resulted in a long list of model improvements and lessons learned on the use of models along with several recommendations, one of the most important being that more validation material databases are needed, preferably experimental but also of results from high/intermediate confidence codes which can serve as validation material for low-fidelity codes. More information can be found on http://www.eera-avatar.eu/

Consortium

The AVATAR consortium consisted of:

  • Energy Research Centre of the Netherlands, ECN (The Netherlands, coordinator)
  • Delft University of Technology, TU Delft (The Netherlands)
  • Technical University of Denmark, DTU (Denmark)
  • Fraunhofer IWES (Germany)
  • University of Oldenburg, Forwind (Germany)
  • University of Stuttgart (Germany)
  • National Renewable Energy Centre, CENER (Spain)
  • University of Liverpool (United Kingdom) (From 1 September 2015: University of Glasgow)
  • Centre for Renewable Energy Sources and Saving, CRES (Greece)
  • National Technical University of Athens, NTUA (Greece)
  • Politecnico di Milano, Polimi (Italy)
  • General Electric, GE (Germany)
  • LM Wind Power (Denmark)

Dr Gerard Schepers

Contact

Dr Gerard Schepers

  • Wind Energy Technology
Email

FOLLOW TNO ON SOCIAL MEDIA

Stay up to date with our latest news, activities and vacancies

We use anonymous cookies to enhance the use of our site. Our privacy statement has been updated to reflect the new EU privacy policy.