No matter how beneficial generating wind energy is, at the end of their life wind turbine blades end up as landfill. In Europe alone, some four million tonnes of composite blade waste is disposed of in this way. The impending ban on dumping wind turbine blades into landfills in the EU means that incineration will soon become the only option. This is why TNO is working on the design of fully recyclable turbine blades.

Collaborate with TNO on fully recyclable wind turbine blades?

Contact Harald van der Mijle Meijer

Contact

Technically and economically feasible

This is already a considerable technical challenge, but at the same time it should also be commercially attractive to design and produce blades in such a way that their eventual dismantling is commercially attractive. The aim is to have a technically and economically viable solution by 2030. This requires the use of new materials and production processes to manufacture modular turbines which are recyclable.

Reuse of current blades

To address the existing waste problem, we have developed a method for extracting the fibres from the turbine blade and reusing them in new, recyclable products. This method was developed by TNO experts at TNO Energy Transition and the Brightlands Materials Center (BMC) in Geleen, which specialises in high-performance materials and sustainable processes. Over half of the constituents of current blades is comprised of glass and carbon fibre, and 30 per cent is epoxy or polyester plastic. At the end of their life cycle, there are various ways to recycle the blades, and these are classified as mechanical, chemical or thermochemical. Currently, we focus on the latter method in particular and, more specifically, on pyrolysis.

Demonstration plant

This process consists of heating the blades in a special oven to almost 500 degrees, which releases the fibres. They can then be processed into thermoplastic composite for use in other products. The main benefit of this is that the new material is fully recyclable again. As a first practical application, the researchers manufactured car parts from the recovered fibres. In the future, many new products can be made using this method. Further upgrading and scaling up are planned for the coming period. The first demonstration plant for the large-scale recycling of wind turbine blades should be in place by 2025. Dismantling the Borselle I and II wind farms using this method would reduce CO2 emissions by more than 50 kilotonnes, when compared to incineration.

Dismantling offers opportunities

We are working on a tool to give interested parties the best advice on the dismantling and recycling of wind farms. This involves a combination of life cycle assessment (LCA) and cost analysis. Together with expert partners, authorities and companies, we have analysed the large-scale dismantling of the wind turbines in the Rotterdam port area, the residual flows and quantities involved, and the opportunities this offers for the business community. With this research we aim to lower the carbon footprint of wind turbines.

Roadmap

Offshore wind farms move up a gear

The expansion of wind farms in the Dutch sector of the North Sea is moving up a gear. In the spring of 2022, the cabinet designated three new areas for the development of wind farms. The original target... Read more
Our work

How large offshore wind farms produce optimal energy

With the huge increase in the number and size of wind farms in the North Sea, optimising the performance of wind turbines is becoming increasingly complex. The higher the turbines and the longer the blades,... Read more
Our work

Innovations for the large wind turbines of the future

New generations of wind turbines are following one another in rapid succession. Increasingly, longer blades allow for higher energy production and lower costs per kilowatt hour. We expect that in just... Read more
Our work

Efficient operation and maintenance of offshore wind turbines

In the harnessing of wind energy, the maintenance of offshore wind turbines accounts for a quarter of the total costs. Over the years TNO has been researching ways to maximise maintenance efficiency and... Read more
Our work

Offshore wind conditions

For the construction of offshore wind farms, developers need a thorough knowledge of the wind conditions at the proposed wind farm location. These conditions are essential to establish the energy yield... Read more
Contact

Ir Harald van der Mijle Meijer