ROPAS - ROll to Roll PAper Sensors
The European paper industry is under pressure with paper use declining approximately 5% per year. Within ROPAS a technology platform is developed to add new functionalities to paper (fibre) based substrates....
Large Area Electronics
Printing electronics on thin substrates such as foil will create a revolution in the electronics industry. This will enable ultra-light and ultra-thin, flexible, easy-to-wear electronic products, lighting and signage devices, reusable and disposable sensor devices, and foldable solar panels and displays.
Roll-to-roll production processes, comparable to what's now being used in the paper printing industry, will enable these devices to be manufactured in large sizes, high quantities and at low cost. The TNO activities on Large Area Electronics are being coordinated by Holst Centre, an open innovation initiative in collaboration with Belgian research centre imec and located on High Tech Campus Eindhoven.
Follow the news of Holst Centre
More information
Flexible & Free-form Products
Email
Email
- Artificial Intelligence
- Defence, Safety & Security
- Roadmaps
- Operations & Human Factors
- Climate Chambers for Research into Human Performance
- Desdemona: the next generation in movement simulation
- LT Lab: the TNO learning technology laboratory
- Performance and health monitoring
- Motion sickness and performance
- The neurobiology of Stress
- NetForce Command: an alternative to hierarchical command and control
- Operational military performance in a virtual world
- SUPRA
- Simulation Live Virtual and Constructive
- Concept Development & Experimentation
- IAMD: Integrated Air & Missile Defence
- JROADS
- FACSIM
- Helicopter studies
- Replacement of the F-16
- MARVEL / Comprehensive Approach
- TNO ACE: Advanced CD&E Environment
- Integrated approach to Dutch Royal Navy patrol ships
- Operational analysis during military operations
- SketchaWorld: from sketch to virtual world
- Information & Sensor Systems
- LFAS - Low Frequency Active Sonar
- Tanker Remote Vision System
- Platform signatures
- TNO shapes the future of MMICs and RFICs
- CARPET: Computer-Aided Radar Performance Evaluation Tool
- Underwater Warfare and Security
- Wide Area Motion Imagery WAMI
- SAKAMATA: sonar and marine mammals
- PARANOID: rapid information processing
- Mine analysis and threat evaluation
- Ship acoustics and underwater acoustic signatures
- PERSEUS Wind Turbine Radar Interference Assessment tool
- Electromagnetic security
- National Security
- A new vision on modernizing the emergency reporting process
- Social media in the security sector
- Cyber Security Lab
- Automatic Video Compilation and Analysis System (AVACS)
- The Dutch Cyber Cube Method: Improving Human Capital for SOCs and CSIRTs
- Security Mission Information & Innovation Group (SMI2G)
- Critical infrastructure protection
- Concealed weapon detection
- FP7 Project IMPACT Europe
- Critical Infrastructure Protection (CIP) policies in Europe
- @MIGO: border control
- Smarter Surveillance, man, machine, synergy
- Cyber Security of Industrial Control Systems
- Protection, Munitions & Weapons
- Weapon Effects & Protection Center
- Firepower
- Protection and survivability of vehicles
- Naval ship protection and survivability
- Protection and survivability of infrastructure
- World-class ballistics research
- Countering IEDs
- Materials for protection concepts
- Processing of Propellants, Explosives and Pyrotechnics
- Ammunition Safety
- Ballistic Performance and Personal Protection
- Chemical, Biological, Radiological and Nuclear (CBRN) Protection
- Expertise groups
- Intelligent Imaging
- Intelligent Autonomous Systems.
- Acoustics and Sonar
- Weapon Systems
- Explosions, Ballistics and Protection
- Chemical, Biological, Radiological and Nuclear (CBRN) Protection
- Energetic Materials
- Human Behaviour and Organisational Innovation
- Networked Organisations
- Training and Performance Innovations
- Perceptual and Cognitive Systems
- Military Operations
- Modelling, Simulation and Gaming
- Electronic Defence
- Radar Technology
- Energy Transition
- Roadmaps
- Towards ubiquitous Solar Energy
- Global leader with innovative solar panels
- From successful tests to real thin Film products
- Smart integration of solar energy into our environment
- SolaRoad
- Solar Highways
- Solar Powered Transportation
- National Consortium Solar in Landscape and Agriculture
- Higher yield and better integration in landscape with bifacial solar panels
- Optimal deployment of the infrastructure for generating solar energy
- Optimal energy generation with aesthetic solar panels
- First solar-powered passenger car: solar cells in the bodywork
- Solar electricity generation in public road infrastructure
- SolarBEAT outdoor test facility for BIPV(T)
- Towards large-scale generation of wind energy
- Support structure just as important as the wind turbine itself
- Wind turbines, fully in motion
- Innovation towards 10-20 MW offshore wind turbines
- How to model 10MW+ turbines aerodynamically?
- Design for Reliable Power Performance (D4REL)
- Reduce costs and improve output through optimised tip design wind blades
- VortexLoads: Vortex-wake models in wind turbine design
- Modelling improvement wind turbine blades
- RealCoE: Converters for Clean, Low Cost and Competitive Electricity
- Haliade X: largest wind turbine ever
- Less production per wind turbine, still higher yield
- Logistics innovative strength at home and abroad
- Leader in wind turbine management and maintenance
- Wind farms in synergy with the environment
- Innovative methods for wind measurements
- Towards broad support for the energy transition
- Towards an energy-producing environment
- Towards CO2 neutral fuels and feedstock
- Biomass to fuels and feedstock
- ARBAHEAT - Sustainable future for coal-fired power stations possible through conversion to biomass
- AMBITION Advanced biofuel production from lignin rich residues
- BECOOL EU Brazilian cooperation on advanced biofuels
- Horti-BlueC - a new EU cooperation on reducing Bio-waste and CO2-footprint in horticulture
- UNRAVEL - valorization of lignocellulosic biomass
- MacroFuels advanced biofuels from seaweed
- BRISK2 Biofuel Research Infrastructure for Sharing Knowledge
- New facility for seaweed processing
- TORWASH technology successfully tested on pilot scale
- Traditional fuels and raw materials
- Hydrogen for a sustainable energy supply
- Optimising production hydrogen
- Hydrogen storage and transport
- Hydrogen, fuel and feedstock
- H-vision: blue hydrogen to accelerate carbon-low industry
- Ten things you need to know about hydrogen
- World first: an offshore pilot plant for green hydrogen
- New research centre for hydrogen production
- Identifying the future international chain of green hydrogen
- Oppertunities for green hydrogen for the manufacturing industry investigated
- Towards CO2 neutral industry
- Towards a reliable sustainable energy system
- Geological Survey of the Netherlands
- Geological Survey of the Netherlands
- 100 years of geological mapping
- GeoTOP
- Sand, gravel and clay extraction
- GIS and other tools for interactive planning
- DINO, Data and Information of the Dutch Subsurface
- BRO: the Dutch Key Register of the Subsurface
- Sustainable use and management Flemish-Dutch subsurface
- Petroleum Geological Atlas of the Southern Permian Basin
- 3D Subsurface mapping of the Dutch offshore
- Geological Survey of the Netherlands across borders
- Expertise
- Industry
- Roadmaps
- Flexible & Free-form Products
- Additive Manufacturing
- Integrating 3D printing and flexible post-processing
- Applied Research for Industrial Automation
- Glass powder printer
- PlanoColor® nanopigments
- High Viscous Material Inkjet Printer
- Line width roughness measurement
- Improved Micro-stereolithography
- Direct Metal Printing
- Rapid Manufacturing Demo Centre
- Continuous 3d printing: faster, cheaper and more flexible
- Large Area Electronics
- Development of new materials
- Van 't Hoff Program
- Next Generation Solar Production Equipment
- Space & Scientific Instrumentation
- Semiconductor Equipment
- Sustainable Chemical Industry
- Feedstock flexibility
- Shared Research Centre for Biobased Aromatics
- BIO HArT Biorizon Innovation and Upscaling of Renewable Aromatics Technology
- TNO at Green Chemistry Campus in Bergen op Zoom
- Biomass: chemical building blocks plastics and coatings
- BIO-TIC partnering platform for cooperation in bioeconomy
- CO2 Utilisation for Chemicals and Fuels
- Low cost, full biodegradable sanitary pads for Bangladesh
- Efficient processing
- Electrification of the chemical industry
- Provide!
- R&D approach and services
- Computational Fluid Dynamics
- Intensified separation technology
- Continuous Crystallisation
- Process Safety Solutions
- Scientifically developed LCA methodologies to improve your carbon footprint of chemicals and sustainability competitive edge
- Improved product functionality
- Tech4Climate Conference
- Heat battery for the home
- Expertise groups
- Buildings, Infrastructure & Maritime
- Roadmaps
- Buildings & Infrastructure
- Infrastructure
- Sustainable buildings: towards an energy-producing built environment
- Building innovation
- Greenhouse design
- Maritime & Offshore
- Expertise groups
- Circular Economy & Environment
- Healthy Living
- Roadmaps
- Health Technology & Digital Health
- Biomedical Health
- Work
- Healthy, safe and productive working
- Safe working
- Sustainable employability vitality
- Future of work
- Ergonomic hand tools in farming (Ghana)
- Cleaner production for textile industry in Bangladesh
- EUWIN, The European Workplace Innovation Network
- Asbestos innovations and research
- Exposure assessment and management of asbestos fibres
- Innovation and detecting asbestos in air, soil and water
- Technological innovations for applications in the asbestos industry
- Innovative and inclusive regional development
- Applied exposome programme: connecting the dots for effective prevention of disease
- Youth
- Expertise groups
- Traffic & Transport
- Roadmaps
- SMART and Safe Traffic and Transport
- Societal impact for accessibility and liveability
- Decision-making information based on facts for municipalities
- Making disruptive technologies practicable
- Accessible, healthy and vibrant cities
- CITYkeys – Performance evaluation framework for smart cities and projects
- Big data ecosystems: collaborating on data-controlled cities
- Knowledge mediator puts an end to bickering
- Intact – Climate resilient critical infrastructure
- Smart mobility and logistics
- Smart vehicles
- Sustainable Traffic and Transport
- Sustainable Mobility and Logistics
- Improving air quality by monitoring real-world emissions
- Emission factors for road traffic
- Measuring the emissions of powered two wheelers
- Emissions of particulate matter from diesel cars
- Random Cycle Generator
- EnViVer: model traffic flow and emissions
- Measuring real-world emissions with TNO’s Smart Emissions Measurement System (SEMS)
- Measuring the emissions of trucks and buses
- Reducing Greenhouse Gas Emissions in Commercial Road Transport
- Measuring the emissions of non-road mobile machinery
- The transition to CO2-neutral mobility in 2050
- Sustainable Vehicles
- Innovative technologies for zero-emission vehicles
- CO2 reduction by high-efficiency Flex Fuel technology with extremely low emissions
- Actual energy consumption and emissions
- Hydrogen and the fuel cell
- Automotive Battery Research
- Making transport more sustainable by means of electric vehicles
- Making transport more sustainable by means of electric vehicles (1)
- Energy Efficient Electric Bus E3Bus
- eCoMove
- Expertise groups
- Information & Communication Technology
- Strategic Analysis & Policy
Contact
Ir. Jaap Lombaers
- Holst Centre
- Solliance
- 3D Printing
- Flexible Electronics
- Medical Devices
Contact
Ir. Jaap Lombaers
- Holst Centre
- Solliance
- 3D Printing
- Flexible Electronics
- Medical Devices