Designing sustainable wind turbines for the circular economy

Thema:
Sustainable design wind turbines

No matter how beneficial generating wind energy is, at the end of their life wind turbine blades end up as landfill. In Europe alone, some 60,000 tonnes of composite sheet waste will be involved annually by 2025, increasing to more than 800,000 tonnes by 2050. The impending ban on dumping wind turbine blades into landfills in the EU means that incineration will soon become the only option. This is why TNO is working on the design of fully recyclable turbine blades.

Technically and economically feasible

This is already a considerable technical challenge, but at the same time it should also be commercially attractive to design and produce blades in such a way that their eventual dismantling is commercially attractive. The aim is to have a technically and economically viable solution by 2030. This requires the use of new materials and production processes to manufacture modular turbines which are recyclable.

Reuse of current blades

To address the existing waste problem, we have developed a method for extracting the fibres from the turbine blade and reusing them in new, recyclable products. This method was developed by TNO experts at TNO Energy Transition and the Brightlands Materials Center (BMC) in Geleen, which specialises in high-performance materials and sustainable processes. Over half of the constituents of current blades is comprised of glass and carbon fibre, and 30 per cent is epoxy or polyester plastic. At the end of their life cycle, there are various ways to recycle the blades, and these are classified as mechanical, chemical or thermochemical. Currently, we focus on the latter method in particular and, more specifically, on pyrolysis.

Demonstration plant

This process consists of heating the blades in a special oven to almost 500 degrees, which releases the fibres. They can then be processed into thermoplastic composite for use in other products. The main benefit of this is that the new material is fully recyclable again. As a first practical application, the researchers manufactured car parts from the recovered fibres. In the future, many new products can be made using this method. Further upgrading and scaling up are planned for the coming period. The first demonstration plant for the large-scale recycling of wind turbine blades should be in place by 2025. Dismantling the Borselle I and II wind farms using this method would reduce CO2 emissions by more than 50 kilotonnes, when compared to incineration.

Dismantling offers opportunities

We are working on a tool to give interested parties the best advice on the dismantling and recycling of wind farms. This involves a combination of life cycle assessment (LCA) and cost analysis. Together with expert partners, authorities and companies, we have analysed the large-scale dismantling of the wind turbines in the Rotterdam port area, the residual flows and quantities involved, and the opportunities this offers for the business community. With this research we aim to lower the carbon footprint of wind turbines.

Get inspired

2 resultaten, getoond 1 t/m 2

Switch to the hybrid energy system

Informatietype:
Webinar
17 February 2023
1 episode
How will our future electricity grid remain stable and affordable? Watch the webinar from 1 February 2023 and get an insight into the technological and societal solutions for our future energy system.

Offshore wind under pressure

Informatietype:
Webinar
31 December 2022
1 episode