How large offshore wind farms produce optimal energy
With the huge increase in the number and size of wind farms in the North Sea, optimising the performance of wind turbines is becoming increasingly complex. The higher the turbines and the longer the blades, the more wind they can harness. However, the turbines also influence each other. TNO is researching how the turbines in a wind farm should operate in relation to each other in order to derive maximum benefit from the wind currents.
This is what is known in the jargon as ‘vortex effects’: as with an aeroplane, behind each wind turbine certain, often very irregular, wind currents are formed. By measuring and mapping these accurately, the ideal operating mode can be determined for each turbine. Researchers from TNO have developed a method to calculate these effects. This creates a precise picture of all air movements throughout the entire field.
Normally, in wind farms, the turbines are positioned as best as possible into the wind. It is clear, however, that a turbine in the disturbed airflow behind another turbine not only collects less wind, but is also subjected to heavier loads, which causes components to wear out more quickly. Therefore it doesn't always make sense to aim for maximum energy production per turbine. TNO has developed an approach in which some turbines are operated sub-optimally, but with all turbines operating together, the yield of the entire farm is maximised. This results in a higher yield than when targeting the individual turbines.
Most favourable wind currents
This patented method is called Active Wake Control (AWC). The turbines at the front of the wind farm are configured so that the wind speed in their wake is higher, allowing the turbines behind them to perform more efficiently. This can be done by, for example, positioning the rotors at a slightly different angle in order to achieve the most favourable wind currents throughout the farm. Using the AWC method, the total energy production from the wind farms can be increased, the lifespan extended and costs reduced. TNO has investigated the effects of AWC on both the performance and load of the wind turbines. In both situations, this is about a few percent profit, which is nevertheless operationally significant.
More profit, less loss
AWC was recently tested in a large project with partner Siemens Gamesa Renewable Energy (SGRE). This project demonstrated that the use of AWC could reduce wake losses. The result was a one per cent increase in production. All wind turbines are fully automatically monitored and controlled by responding to the constantly changing wind conditions, thereby continuously optimising the wind farm's output.
Harald van der Mijle MeijerFunctie:R&D portfolio manager
Ir Harald van der Mijle Meijer is a materials engineer and has been working in offshore wind research since 2007. Harald has a passion for wind, sea and sustainability and applies this for the strategy and implementation of the development of innovations in wind energy together with the industry. At TNO he has carried out several national and international projects on a wide range of topics. In addition to being a consultant, he is R&D portfolio manager on the research line 'Offshore Wind Farms'.
Looking for another expert?View all experts
Webinar: Offshore wind under pressure
Offshore wind energy is growing enormously, but this growth comes with challenges. To maximise the value of large volumes of wind energy in the future energy system, we need to ensure feasible business cases for developers.
Webinar: Switch to the hybrid energy system
How will our future electricity grid remain stable and affordable? Sign up for the webinar and get an insight into the technological and societal solutions for our future energy system.