New North Sea monitoring station for offshore wind farm expansion
The substantial expansion of offshore wind capacity from 4.5 gigawatts in 2023 to as much as 21 GW in 2030 requires action on many fronts. One way in which TNO is contributing to this is by accurately mapping wind speeds over the North Sea. As two new wind farms, good for almost 5 GW, are planned north of the Wadden Islands, we commissioned a fourth monitoring station this spring. The measurements are of great interest to wind farm designers and operators.
Fourth monitoring station
The monitoring station is built on NAM's L2-FA-1 platform in the northern part of the North Sea, about eighty kilometres north of Texel and sixty kilometres west of the future wind farms 'Ten noorden van de Waddeneilanden’ (700 MW) and 'Doordewind' (4 GW). The monitoring station was completed in March and will be operational in the second quarter of 2023. It is TNO's fourth monitoring site in the North Sea. Some 30 km west of the South Holland islands lie Lichteiland Goeree (LEG) and Europlatform (EPL); platform K13a lies 100 km west of Texel. Measurements have been taken on behalf of the Ministry of Economic Affairs and Climate Policy since 2012.
Further and further out to sea
“The offshore wind farms are getting considerably larger and also moving further and further offshore. There, the wind behaves differently than near land. On K13a, we started measuring far out at sea, west of our country for the first time. Now, an additional monitoring site is added a good distance north of the Wadden Islands”, says TNO wind expert Hans Verhoef.
“Measuring wind speeds and directions at various heights at various locations under various weather conditions provides a huge amount of data that helps optimally design wind farms.”
Measurements publicly available
The measurements are done using LiDAR (Light Detection And Ranging), laser-based measurement systems. The system sends pulses of light into the air and from the reflection of air particles, or aerosols, wind speed can be determined up to a height of 200 metres and beyond. TNO is making the results publicly available via the website WindOpZee.net. Wind farm developers and other stakeholders use the data to determine the most favourable location of the farms and to optimise the design. In practice, this increases yields by percentage points.
Filling the gap
“These parties need mainly long-term measurements of speeds and directions at as many altitudes as possible,” says Hans. “The future wind farms ‘Ten noorden van de Waddeneilanden’ and ‘Doordewind’ are expected to be operational in 2031, and companies can bid for tenders for the lots in 2027. By then, we will have collected a wealth of data that will benefit all parties involved. The area north of the Wadden Islands is still largely virgin territory when it comes to wind measurements. We are going to fill that gap.”
North Sea Wind Atlas
The measurement data from the four sites can also be used to update the Dutch Offshore Wind Atlas on an ongoing basis. Previously, TNO worked closely on this with the Royal Netherlands Meteorological Institute (KNMI) because of their expertise in weather models and with the Delft-based company Whiffle, which specialises in ultra-high-resolution atmospheric models.
The current atlas also provides data on wind up to 600 metres but there is a strong desire to keep the atlas up to date. For that, additional data from meteorological masts, floating LiDARs, satellites, and aircraft is of great importance. This enables predictions of wind speeds at higher altitudes and of wind shear, a sudden turning of wind.
“What makes us unique in this is that we are independent and accredited in this field. The consumers of our data are always assured of the latest, accurate, reliable data,” Hans Verhoef says.
As the height of offshore wind turbines increases, measurements will also be taken in increasingly higher air layers, Hans expects. And with the increase in the number of wind farms, more measurements are needed to determine the so-called vortex effects. Similar to aircraft, wind turbines produce wakes, which affect yield and load of other turbines.
“We are going to do a lot more measurements to get insights into how the wind farms affect each other and how to minimise those effects.”
Catherine EeckelsFunctie:Project manager wind energy
Catherine Eeckels has a background in aerospace engineering and joined TNO offshore wind research in 2022. She has experience in working in multi-disciplinary international teams for design and development of aerostructures. As a project manager, she is involved in different projects having a relation with (meteorological) measurements for wind energy developments, system integration and ecology aspects for wind farms.
Harald van der Mijle MeijerFunctie:R&D portfolio manager
Ir Harald van der Mijle Meijer is a materials engineer and has been working in offshore wind research since 2007. Harald has a passion for wind, sea and sustainability and applies this for the strategy and implementation of the development of innovations in wind energy together with the industry. At TNO he has carried out several national and international projects on a wide range of topics. In addition to being a consultant, he is R&D portfolio manager on the research line 'Offshore Wind Farms'.
Looking for an expert?View all experts
Towards new methods for designing wind turbines
TNO, together with Delft-based company Whiffle, has developed a new research method for designing wind turbines that significantly reduces the gap between simulation and reality.
TNO innovation offers discarded wind turbine blades a circular future
Wind energy is gaining momentum. TNO is advanced with a promising solution for recycling discarded wind turbine blades.
Image: Brightlands Materials Center