Informatietype:
Project
Thema:
Circular plastics
Microplastics
Unit:
Energy & Materials Transition

Why reducing microplastics is essential and achievable

Microplastics are increasingly found in the environment worldwide, and even in the human body. These minuscule particles originate from packaging or car tyres, for example, and spread through the air, water and soil. The quantity of plastics is increasing rapidly, and with it the quantity of microplastics. We must intervene in order to avert unknown future problems, including risks to health. Our experts have calculated how we can achieve a 70% reduction in the quantity of microplastics by 2050.

Download the white paper

Microplastics are everywhere: a 70% reduction is achievable. Read about the measures that will result in a maximum 70% reduction in microplastics by 2050.

Microplastics: prevention is better than cure

It has only recently become known that microplastics can penetrate deep into the human body (see World Health Organization report). The health risks of microplastics are still largely unclear, but studies increasingly indicate that they’re potentially dangerous.

Meanwhile, the production of plastics is showing huge growth, and it’s estimated that by 2050, plastics use will have increased fourfold. This growth is increasing the potential risks of microplastics for humans and the environment. To avert future problems, action is needed now to minimise exposure to microplastics.

The dark side of plastics

In spite of the bad reputation that plastic sometimes suffers from, its mass use since the 1950s has led in many ways to sustainability and improved well-being and prosperity.

But the properties that make plastic so durable also have a dark side. Plastic decays very little – or not at all – but over the long term, it does break down into minuscule particles. These are microplastics: pieces of plastic that are so light and tiny that they spread into every corner of our living environment.

unresolved downsides of plastics, including microplastics

TNO’s microplastics model

An understanding of the entire life cycle of plastics – their production, use, and end-of-life phase – has been lacking until now. We’ve therefore designed a model that brings together research into the formation and spread of microplastics, and potential countermeasures: TNO’s microplastics model.

The aim of the model is to give direction to policy. Results show that adopting the right measures may result in a significant reduction in microplastics.

70% reduction in microplastics is possible

We’ve conducted extensive research on microplastics in the Netherlands and potential measures to reduce the quantity of such plastic particles.

This shows that a reduction in microplastics of around 70% by 2050 is achievable through the maximum deployment of 17 mitigation strategies. The 17 measures are grouped into 9 categories (see below).

17 measures for reducing microplastics, grouped into 9 categories
The 17 measures for reducing microplastics, grouped into 9 categories. A total reduction of 70% is achievable.
Transcription

The 17 measures against microplastics are examples of realistic, potentially effective mitigation strategies, grouped into the following 9 categories:

  • Policy and regulations
  • Waste management and infrastructure
  • Behaviour
  • Clean-up and tidying campaigns
  • Choice of materials for textiles and packaging
  • Product design for packaging and car tyres
  • Process design for recycling
  • Separation technology for microplastics
  • R strategies: refuse and reduce

The remaining 30% of microplastics are present in various environmental compartments, made up of plastic products that break down slowly in the environment.

Top 5 measures for reducing microplastics

Of the 17 measures studied, 5 appear to have the greatest impact in reducing the formation of microplastics. These are:

  1. Widespread roll-out of deposits principle and encouraging litter clearing
  2. Accelerate innovations in packaging materials
  3. Accelerate innovations in tyre materials
  4. Better recycling
  5. Applying the R strategies (Refuse and Reduce)

Working together to reduce microplastics

If industry, government bodies, consumers, knowledge institutions, and NGOs combine their activities, it will be possible to achieve a 37% reduction in microplastics by as early as 2030. This reduction could be 70% by 2050, even if plastics consumption increases.

Are you wondering how your policy could contribute to these efforts? Or are you curious as to which measures can contribute most to achieving your business objectives?

We’re happy to help you work out the best strategy. To this end, please contact our expert Sieger Henke.

Get inspired

13 resultaten, getoond 1 t/m 5

Surprisingly, in addition to packaging, car tyres and agricultural plastic biggest sources of microplastics in the Netherlands

Informatietype:
News
10 November 2022

TNO's microplastics model has identified the biggest contributors to microplastics. There is also insight for action against microplastics.

Plastic waste in Indonesia gets value in 2 new P4G projects

Informatietype:
News
22 June 2022
TNO is working in a P4G's "Plastics in Circles" partnership. In two new projects we are working together on reducing plastic waste in Indonesia.

Microplastics and the unknown risks

Informatietype:
Article
What are microplastics and what are the effects on people and the environment? At TNO, we research the risks of and solutions to microplastics.

Polymer solutions

Informatietype:
Article

How can we make plastics more sustainable? By extending their service life. We are researching the degradation of polymers and creating innovative solutions.

The PRISM model

Informatietype:
Article
To investigate the possibilities for circular and low-carbon economy plastics, TNO is working on a Plastic Recycling Impact Scenario Model: PRISM.